Mobotix D24M Bedienungsanleitung PDF herunterladen (Seite 57)







www.mobotix.com • [email protected]

 

Install and prepare







The pre-installed cable attached to the camera

must be connected with the on-site network cable. For installation without acces-

sories, a ﬂush-mounted socket must be installed ﬁrst to provide space for the con-

nection. The cabling is now perfectly protected and cannot be seen or accessed

from the outside. The camera cannot be mounted directly on top of protruding,

surface-mounted sockets. Use the supplied camera drilling template (fold-out at

the end of this manual) to mark the position of the ﬂush-mounted socket for the

desired camera position.

   

Dri l l the holes for t he s upplied scr e w anchors (see drilling template).





Connect the on-site network cable to the camera patch cable

using a standard connector.







Use the (included) screws to ax the mounting ring and the

camera at the designated position.

he outer shell is required at a later stage in the installation and is attached only

when the dome has been removed and placed back after a lens adjustment.

roceed to Section 2.11, Aiming And Adjusting The Lens.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 147 148

Keine Kommentare

Mobotix D24M Bedienungsanleitung Seite 57