Mobotix S15 Spezifikationen PDF herunterladen (Seite 77)

77/164

Determining the Installation Position

www.mobotix.com • [email protected]

Ceiling-Mounted

Indoor installation is mostly on suspended ceilings and is extremely easy. A round hole

with a diameter of 45mm/1.77 in is all that is needed, through which a S15D sensor

module with connection cable and attached ferrite is pushed down through the ceiling

panel, ﬁxed from behind using a nut and then connected to the concealed base module

hidden behind a ceiling panel (connector and lock).

It should be ensured when selecting installation sites that each of the sensor cables do

not exceed 3m/9.8ft (5MP – 2m/6.6ft). The theoretical maximum distance between

the two sensor modules of a S15D where the base module is placed centrally is therefore

6m/19.7ft (5MP – 4m/13.1ft).

Caution

If there is a risk of water collecting on the back of the sensor modules (for example,

in outdoor areas or in the event of extreme humidity), the modules should not be

installed pointing downwards!

Step 1:

Plug in connection cable, secure

with bayonet catch and attach

ferrite

Step 2:

Drill hole (43mm/1.69in), feed

through cable with sensor module

Step 3:

Secure sensor module with nut

Diam. 43 to 45mm/1.69 to 1.77in

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 163 164

Keine Kommentare

Mobotix S15 Spezifikationen Seite 77