Mobotix S15 Spezifikationen PDF herunterladen (Seite 86)

86/164

S15 Camera Manual: Installation

www.mobotix.com • [email protected]

Inserting and Locking MOBOTIX Cables and Plugs

The corresponding lock must be applied or closed again after inserting one of the cables

or plugs indicated above into the S15:

Patch Cable MiniUSB Sensor Cable

1. Insert the cable/plug.

2. Attach bayonet catch.

Turn the bayonet catch to the right.

1. Insert the cable/plug.

2. Push the triple retainer down

(towards the base plate) until it

clicks into place.

2.2.2 Notes on Cable Lengths and Power Supply

•

Power is supplied to the camera via the camera Ethernet connection (patch or instal-

lation cable). We recommend using a MOBOTIX PoE adapter or another similar

high-quality PoE product to loop-in the power supply:

– One camera: with the PoE adapter (MX-NPA-PoE or MX-NPA-Box)

– Multiple cameras: with PoE products conforming to IEEE 802.3af (PoE switch)

• The maximum length of the network cable for power supply over an Ethernet cable

is 100m/110yd.

• Make sure that you only use switches or routers that support the 10/100 Mbps

network interface of the camera.

•

We highly recommend using uninterruptible power supplies (UPS) to provide backup

power.

• If you are using IEEE 802.3af or IEEE 802.3at (PoE+) Power-over-Ethernet network

components to supply power to MOBOTIX cameras, make sure, if possible, that

these components do not have a fan. Since the power consumption of MOBOTIX

cameras is very low compared to other products, the reliability of the entire system

is increased, thus extending the life of these components.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 163 164

Keine Kommentare

Mobotix S15 Spezifikationen Seite 86