Mobotix T24 Technical Information PDF herunterladen (Seite 23)

23/118

www.mobotix.com • [email protected]

What Can I Do With My Door Station Now?

All the most important door station functions are now available:

• The bell button on the camera module and on the keypad (if present) are working.

• All the door station modules, including the T24-DoorMaster and videophones, are

integrated and the basic settings have been conﬁgured.

• The live image of the master door camera is automatically displayed when you pick

up the receiver on a Grandstream videophone.

•

Two-way communication between the camera module and remote stations is initiated

by pressing “7“ on the videophone.

• You can open the door conveniently via a remote station, provided an electrical door

opener has been connected.

• The basic settings for voice mailbox has also been conﬁgured. If no one responds to

the door bell within 30 seconds (no one picks up the receiver and opens the door),

the visitor is asked to leave a message, which is recorded by the camera module

and can be played back later via the keypad or a videophone.

How Should I Hold A Transponder Card Up To The Keypad?

When setting up a transponder card, you should ideally hold the card between the thumb

and index ﬁnger of one hand and move it as close as you can to the keypad until a beep

sounds. Make sure that the card does not touch and inadvertently trigger any of the buttons.

During daily operation, you can usually gain keyless access by holding your user card up

to the keypad while it is still in its protective case or in your wallet.

How Can I Protect My Door Station Against Unauthorized Access?

You can now leave the outdoor station and complete the initial system startup by protecting

your system against unauthorized external access (see Sections 2.3 and 2.4).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 119 120

Keine Kommentare

Mobotix T24 Technical Information Seite 23