Mobotix T24 Technical Information PDF herunterladen (Seite 61)

61/118

Managing Transponders

www.mobotix.com • [email protected]

6. Erase current user card: Hold the card up to the keypad until you hear the ﬁrst

beep (the key button’s ﬂashing pattern will change) and pull the card away again.

Next, conﬁrm the card by again holding it up to the keypad until you hear a beep.

Erase non-present user card: Enter the card’s transponder number and press the

ESC/ALARM button until the second beep sounds. Re-enter the transponder number

to conﬁrm and again press the ESC/ALARM button until you hear the second beep.

7. The card details have now been erased from the system and, if required, the card

can be set up afresh. You are now back in conﬁguration mode (the OK/MENU

button lights up blue). Press the ESC/ALARM button to exit. After 60 seconds, the

mode is exited automatically.

Notes

In case of a wrong entry, cancellation of entry via the ESC/ALARM button, or a delay

of more than 60 seconds, a low warning tone is sounded and the system reverts to

the regular operating mode (all buttons light up white). If required, re-enter into Erase

mode as described above.

0 9

Transponder No.

ESC

hold (2nd beep)

0 9

Transponder No.

ESC

hold (2nd beep)

ESC

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 119 120

Keine Kommentare

Mobotix T24 Technical Information Seite 61