Mobotix D12 Technical Information PDF herunterladen (Seite 33)

Corner and Mast Mount (MX-MH-Dome-ESWS)

If you are intending to mount the camera to the cor-

ner of a building or a mast, you should consider

using the MOBOTIX Corner and Mast Mounting bra-

cket. This mount is made from 3mm stainless steel

(white, powder-coated) and has been designed

specifically for outdoor use. The supplied stainless

steel straps allow attaching the bracket to masts

with diameters from 60 to 180mm (2.4" to 7.1").

MOBOTIX Cam-IO (MX-CAM-IO)

This installation module for MOBOTIX cameras

features numerous connectors for external devices.

It thus expands the scope of camera applications

when adding external sensors using its two signal

inputs. On the other hand, it also allows controlling

other devices (two signal outputs, Line In/Out for

audio signals) and serves as power supply of the

camera.

For additional information on the MOBOTIX Cam-IO,

see section 3.7.2,

MOBOTIX Cam-IO

Expansion Mo-

dule for Easy Installation

The MOBOTIX Cam-IO will be available from Q1 2007.

Split cable for ISDN-only power supply

If only ISDN is available for the camera and only one cable should be used for con-

necting the camera, you will need to inject power into the 8-wire cable using either

a power supply and the Network Power Adapter or an MX-NPR-4/8/20.

www.mobotix.com • [email protected] • 23.11.2006

31/96

D12 Camera Manual Part 1

SecureFlex Pole Mount:

Outdoor quality made of

3mm stainless steel

Expansion box with

various possibilities for

attaching external devices

and sensors

Power injection into one

cable when using only

ISDN

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 99 100

Keine Kommentare

Mobotix D12 Technical Information Seite 33