Mobotix D12 Technical Information PDF herunterladen (Seite 46)

• Properly lead the cable through the cable

guides at the outer rim of the casing and

make sure that the outer shell can be prop-

erly mounted later on.

2.6.4 Connecting a Cable to the Serial interface (RS232)

If the RS232 interface of the MOBOTIX D12D-Outdoor is to be used for switching

external relays (lights, alarm sirens, gates, etc.), evaluating external sensors (light

barriers, etc.) or for data connections (weather station, GSM/GPRS modem, etc.),

you need to install an additional serial cable (similar to the steps in section 2.5.2)

before installing the camera.

Due to the design of the camera, a suitably short connector should be used to

ensure that the cable cover still fits perfectly without jeopardizing the

weatherproofness of the camera.

Please also make sure that the serial cable is thick enough to fill the cable guide

beneath the cable cover so that no water can enter the area beneath.

Section 3.7,

Signal Input/Output (RS232 Interface)

, contains more information on

the RS232 interface (pin-out, etc.).

www.mobotix.com • [email protected] • 23.11.2006

44/96

D12 Camera Manual Part 1

Switching external relays

using the RS232 interface

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 99 100

Keine Kommentare

Mobotix D12 Technical Information Seite 46