Mobotix M22M Technical Information PDF herunterladen (Seite 27)

When mounted to a ceiling, the camera can be turned/tilted as follows:

• horizontally: approx. 360°

• vertically: approx 90°

2.7.3 Converting the Wall Mount to Ceiling Mount

If the camera is to be mounted to a ceiling, it is necessary to convert the SecureFlex

wall mount. Proceed as outlined in the following:

• Unscrew the Allen screw in the mount, which holds the turn/tilt unit in place

(5mm Allen wrench). Remove the Allen screw, the washer and the hex nut

from the mount and unplug the cover.

• Gently pull the turn/tilt unit and the installed cable out of the vertical open-

ing of the mount.

• First insert the cable, then the turn/tilt unit into the horizontal opening of the

mount (all the way to the stop).

• Press the cover into the unused opening of the mount.

Mount Pull out!

Push in until

reaching

stop!

Mounting to a wall

Mounting to a ceiling

Remove cover

Reseat cover

www.mobotix.com • [email protected] • 31.1.2007

25/56

M22M Camera Manual Part 1

Converting from wall

mount to ceiling mount in

four steps

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Keine Kommentare

Mobotix M22M Technical Information Seite 27