Mobotix MX-KEYPAD1-EXT-SV Technical Information PDF herunterladen (Seite 123)

123/148

Finishing The Installation

www.mobotix.com • [email protected]

The signal output option is set on the T24-DoorMaster in three steps as part of

system startup.

Step 1: Press both buttons at the same time for 5 seconds (until double beep)

You are now in administration mode (red LED turns o shortly every 3 seconds).

Step 2: Press door opener button (right) to conﬁgure the signal output option

You can switch between signal output options 1 to 3 by pressing the right button repeatedly.

The ﬂashing pattern of the blue LED signals the currently selected setting.

• Blue ﬂashing 1x every 3 seconds: Self-powered

• Blue ﬂashing 2x every 3 seconds: Relay

• Blue ﬂashing 3x every 3 seconds: Mediator

Step 3: Press both buttons at the same time for 5 seconds (until double beep)

The setting has been saved and you are exiting administration mode.

Notes

Test that the T24-DoorMaster is functioning by pressing and holding the door opener

button for 3 seconds. It should now be possible to open the door from the outside.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 149 150

Keine Kommentare

Mobotix MX-KEYPAD1-EXT-SV Technical Information Seite 123