Mobotix MX-KEYPAD1-EXT-SV Technical Information PDF herunterladen (Seite 131)

131/148

Installation In The Siedle Vario System

www.mobotix.com • [email protected]

Mounting The IO Module And Terminal Connectors

After installing the on-wall or in-wall frame (note the "Top/Oben"

indicator), fasten the individual module terminal connectors

by positioning and simultaneously rotating them by hand

(from approx. 10 to 12 o'clock).

Fasten the IO module, which must always be placed behind the

camera module, in the same manner. To simplify installation,

we recommend connecting the IO module to the network

cable ﬁrst (see the following section).

The ﬁgures show the correct ﬁnal position of the connector terminals and IO module

for both vertical and horizontal mounting of the door station.

Connecting The Network Cable To The IO Module

See Section 2.3.5.

T"+$, \"''$1+ +5$

`+5$#'$+ 1*/<$ +"

+5$ +$#) '*< /"*#;

/$("#$ >"2&+&"'&'@

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 149 150

Keine Kommentare

Mobotix MX-KEYPAD1-EXT-SV Technical Information Seite 131